The Alpha LT-FMJ HF Antenna is an ultra-portable multiband Military 2.0 type system rated at 500W PEP SSB fits in an included 16 inch Field Bag. This multipurpose antenna that is pre-tuned requires no moving clips on coils or readjusting of whips for tuning. You may also use an external antenna tuner if your antenna is installed over a poor ground or not placed in a clear area.
When fully deployed with the NVIS, Vertical & Grounded Counterpoise elements, the antenna system can be configured to launch your signal at your target in the opposite direction the NVIS element is run. For an omnidirectional signal pattern, you may remove the NVIS element.
Installation Note: Never Remove or Loosen any of the Bolts, Washers, Nuts, or Caps on the Alpha Match.
History - Years of perfecting the manufacturing process has enabled Alpha Antenna to offer the worlds most refined & resilient antenna, which is now in use by NASA and military forces around the globe. (Ref. Capabilities Statement )
Function: For targeted rapid deployment of ALE/Digital/CW/SSB/AM modes. The multiband Military 2.0 FMJ enhances high band DX with the Vertical MilStick element while low band Near Vertical Incident Skywave is simultaneously enhanced with the NVIS element, per the antenna model at the bottom of this page.
Deployment Options - A) Base Camp, B) Portable, C) Mobile, and D) Manpack.
1 - 16x4x4 inch Compact bag holds all of the following, but not the optional tripods
1 - Alpha Match encased in a FMJ (Full Metal Jacket) 316 Stainless Steel and weather proof housing that shields all internal components from all RFI (Radio Frequency Interference).
1 - MilStick whip made from .433" thick 13" aluminum sections
1 - 8' ground wire with ground stake
1 - QUICK Deployment Riser on Stainless Steel Jaw Mount=No loose hardware
1 - 25' NVIS element wire with green insulator and removal stake
• Frequency: 6M – 80M
• Power: 500W SSB (200 CW or 100W Digital)
• RF Connection: SO-239
No changing of switches, jumpers or coils are required for touch free operations.
Directional - Unique also to only to the Alpha Multiband Antenna line of systems is a directional antenna system for international DX communications that also enhances NVIS (Near Vertical Incident Skywave) for stateside communications.
The Alpha Match - Before assembly, the inner wall of the stainless steel housing is lined with a dielectric, then the transformer is placed inside the housing. This is what gives the Alpha Match both the capacitive and inductive balance once the elements are installed. The main difference between legacy designs, which are black and made of either a plastic Delrin or PVC, is that those older designs do not have capacitive characteristics. This is what enables the Alpha Match to balance the entire antenna system once the elements are installed. It is important to note that the Alpha Match housing is made of 316 stainless steel, which has non-magnetic characteristics to eliminate eddy currents.
The MilStick Whip - The composite of the .433 inch diameter MilStick whip is a high strength, high quality, aerospace 7075-T9 alloy 13 feet long. The construction of each element has a scratch-resistant hard-anodized surface. This surface is fully removed from each insert and also removed 2.5 inches inside each element. The inserts are then electrically bonded, where full contact RF continuity and connectivity is used to ensure maximum efficiencies are achieved. At the base of the whip an embedded 8740 Steel (chrome moly) cadmium plated stud supports the MilStick on the Alpha Match.
The Wiring Used - Sheathed memory free wiring is used, which is rated for temperatures from -40°C to +75°C. VS. Wiring that is so light duty that it can be wrapped around a kite string holder.
The Padded Field Bag - Made from 600D nylon with embroidered logo and with high quality zippers. This highly customized bag has a padded front pocket and a padded larger inner compartment, plus a shoulder strap with padded shoulder pad.