DXE-RADP-3 Radial Plate

Radial Plates are made of 304 Stainless Steel, 1/8 inch thick and 11.625 in. x 11.625 in. outside dimensions. They are made with the finest Stainless Steel that will last.

Radial Plate is meant for those of you that have or are building a quarter wave vertical antenna and who want an easy, neat and effective way to connect those essential radial wires and the coax to your vertical antenna for the lowest takeoff angle and strongest signals.

It is square. Why? Because a square has more lineal distance around it than the round plates that you usually see. This allowed us to put 60 holes in it, use larger bolts for more clamping power and still not crowd them together. Remember: The more current that flows in through your radials and through this plate, the stronger your signal is going to be and the more DX stations that you are going to hear. So, put on as many radials as you can.

This plate actually has a place where you can attach your coax! What a concept! The plate assembly has been drilled for optional SO-239 Chassis Mount and Bulkhead Fittings. This is a MUST item for proper handling of RF ground current! it is imperative that your coax be grounded to the radials to complete the circuit for your radial current.

Radial Plate will attach easily and rigidly to a 4x4 or 6x6 wooden post using simple wood screws, or to a steel or aluminum pipe (up to 3.0 in. outside diameter) using an optional saddle clamp, to attach to whatever you have supporting your vertical.