RigExpert AA-230 ZOOM (0.01-230MHz) Analyser

This analyser is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 100kHz to 230MHz

A built-in ZOOM capability makes graphical measurements especially effective.

An integrated Time Domain Reflectometer mode can be used to locate a fault within the feedline system.

The following tasks are easily accomplished by using this analyser

• Rapid check-out of an antenna
• Tuning an antenna to resonance
• Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
• Making coaxial stubs or measuring their parameters
• Cable testing and fault location, measuring cable loss and characteristic impedance
• Measuring capacitance or inductance of reactive loads

Specification

• Frequency: 0.1 to 230MHz
• Frequency entry: 1KHz resolution
• Measurement for: 25, 50, 75 and 100-Ohm systems
• SWR measurement range: 1-100 in numerical mode / 1-10 in chart mode
• R&X range: 0…10000, - 10000…10000 in numerical mode /0…1000, -1000…1000 in chart mode
• Dimensions: 82mm x182mmx32mm
• Weight:236g
• Operating temperature: 0-40 C (32-104 F)

Display modes

• SWR at single or multiply frequencies
• SWR return loss: R, X, Z, L, C at single frequency
• SWR Chart: 20 - 500 points
• R X Chart: 20 - 500 points
• Smith Chart: 20 - 500 points
• Return loss Chart: 20 - 500 points
• TDR (Time Domain Reflectometer) chart
• Cable tools (loss and characteristic impedance)
• 100 slots to save measurement results

RF Output

• Connector: N type
• Output signal shape square
• Output power: -10dBm (at 50 Ohm load)

Power

• Four 1.5V alkaline batteries, type AAA
• Max. 4 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used
• When the analyser is connected to a PC or a DC adapter with USB socket, it takes power from these sources

Interface

• 290×220 colour TFT display
• 6×3 keys on the water-proof keypad
• Multilingual menus and help screens
• USB connection to a personal computer

Bluetooth spec

Bluetooth Specification v.4.0 (BLE). Compatible with Android OS ver. 6.0 and higher. Analyzer AA-230 Zoom does not work through Bluetooth connection together with OS Windows and AntScope2.